Motorcycle Custom Rack Mount Fuel Cells, Sampson Long Distance Motorcycle Products

Custom Rack Mount Fuel Cells

To quote a fuel cell, we need the following information:

Please give all measurements in inches

1. Length, Width, and Height
2. Maximum gallonage (if its a concern)
3. Any angles involved other than 90 degrees
4. How its going to mount; i.e., stud, bolt, etc.
5. If it will be mounted on an existing rack, where do you want the bolts placed?
6. Where do you want the fuel outlet placed?
6.A. What size and thread?
7. Where do you want the vent placed?
7.A. What size and thread?
8. Is there anything close like a sissy bar or back rest that is higher than where the rack will be?
9. Will you need a fuel pump? (If you're fuel injected, usually the answer is yes UNLESS you have a split tank. Usually with a split tank, you will see a small diameter fuel line pass beween both sides of your tank.)

Length = Width = Height =
(in inches)

Gallons

Rack Mount

Length, Width, and Height

Length Width Height

Maximum gallons needed

Angles involved other than 90 degrees

Mounting

Size 1/4-20 5/16-18 3/8-16
Length

Does the bottom of the cell need to be flush?
(Need to know if mounts can be outside surface mounted)

Yes No

Mounting stud or bolt placement

FRONT is the side of the fuel cell that faces toward the front of the bike. We need at least 1/2" from the side as we use an insert we need space for.

We need at least 1/2" from the side to put an insert in.
1. From front  1. From right side
2. From front  2. From right side
3. From front  3. From right side
4. From front  4. From right side

Normally riders use the side stand at gas stations and prefer the filler on the right. We will locate it per your requirements.

What type of filler?

None
Standard (quick fill) as shown on Standard (quick fill) as shown on http://www.sampson-sporttouring.com/r1100rsl-fuel-cell.html
Threaded as shown on http://www.sampson-sporttouring.com/alternate-fuel-caps.html

Fuel outlet placement?
We need at least 1/2" as we use an insert.

From front From right side

What size of fuel outlet?

1/4" NPT 3/8" NPT 1/2" NPT

Vent placement?
We need at least 1/2" as we use an insert.

From front From right side

What size vent?

1/8" NPT 1/4" NPT 3/8" NPT

General comments or additional information. Is there anything close like a sissy bar or back rest that is higher than where the rack will be?

Your Email Address

Your name

What will the fuel cell be installed on?

Brand

Model

Year