Sampson Made Products
For Hyper-Lites, Beaded Seat Covers, Cramp Busters, & Driving Lights Order Form, Click Here
Paying by Check or Money Order? Simply add up your order including shipping and mail to: Sampson Sport Touring, PO Box 272, Chloride AZ 86431 Canadian and International Shipping, please Click Here Before Ordering |
| Fuel Cells | Item | Price |  | S & H (USA Addresses ONLY) | ||||||||
| Fuel Cells Note: all cells now come with the screw in type cap except the "Vision" which doesn't require a cap | ||||||||||||
| BMW | ||||||||||||
| BMW KLT1200 Fuel Cell This is for mounting on a pillion seat pan. | $565 | $35 | ||||||||||
| BMW KLT1200 Fuel Cell Hardware Kit (includes fuel pump, lines, fittings kit, & a switch). This is for mounting on a pillion seat pan. Optional Elec. valve | $145.25 | $12.50 | ||||||||||
| BMW KLT1200 Fuel Cell This is for direct mounting to the frame in the pillion area. | $565 | $35 | ||||||||||
| BMW KLT1200 Fuel Cell Hardware Kit NO fuel pump - this is for a bulkhead fitting tie-in, lines, fittings kit | $111.97 | $12.50 | ||||||||||
| BMW R1100 RSL Fuel Cell Use either of the BMW KLT1200 Fuel Cell Hardware Kits above. | $565 | $35 | ||||||||||
| FJR 1300 | ||||||||||||
| Pillion Fuel Cell for FJR (Fittings not included) | $545 | $35 | ||||||||||
| FJR 1300 | ||||||||||||
| "Tail Dragger" Fuel Cell for FJR (Fittings not included) | $600 | $35 | ||||||||||
| FJR Fuel Cell Hardware Kit (works w/ either FJR cell) With Fuel Pump, Fittings, switch, lines, electric valve & quick disconnect included | $154.74 | $12.50 | ||||||||||
| FJR Fuel Cell Hardware Kit (works w/ either FJR cell) With Fittings (includes bulkhead fitting), lines, manual valve & quick disconnect included | $83.47 | $12.50 | ||||||||||
| Gold Wing | ||||||||||||
| "Ron Smith Style" EZ Fuel Cell for 1500 Gold Wings Includes cover with back pad & map pocket. These cells can also be used on the 1800 | $565 | $35 | ||||||||||
| "Ron Smith Style" EZ Fuel Cell for 1500 Gold Wings No cover. These cells can also be used on the 1800 | $455 | $30 | ||||||||||
| "Ron Smith Style" EZ Fuel Cell for 1500 Gold Wings Hardware Kit Fittings, lines, valve & quick disconnect included | $60.50 | $10 | ||||||||||
| Honda ST1100 | ||||||||||||
| ST1100 "Vision" Fuel Cell & mounting brackets (no filler - fuel cell fills from your main tank), satin black powder coat | $570 | $35 | ||||||||||
| ST1100 "Vision" Fuel Cell Hardware Kit Fittings, lines, valve & quick disconnect included, , includes mega-lines for quick filling and fittings kit, (tail light & bracket not included) | $92.81 | $12.50 | ||||||||||
| ST1100 Fuel Cell & mounting brackets screw type cap included (also the vent fitting &, outlet fitting) | $590 | $35 | ||||||||||
| ST1100 Fuel Cell Hardware Kit Fittings, lines, valve & quick disconnect , (tail light & bracket not included) | $68.33 | $12.50 | ||||||||||
| Standard Fuel Cell approximately 3.25 gallons | ||||||||||||
| Standard Fuel Cell" Straps & screw type cap included (also the vent fitting &, outlet fitting) | $400.00 | $30 | ||||||||||
| "Standard Fuel Cell fitting kit" Fittings, lines, valve & quick disconnect included. This is designed to be a gravity feed application. Not included is a pump & switch. (These are avaiIable for $80 extra) | $65.50 | $10 | ||||||||||
| FJR 1300 Accessories | ||||||||||||
| Is your address outside the United States? Click here before ordering to avoid unnecessary delays. | ||||||||||||
| FJR 1300 Rider Backrest 2005 and earlier | Rider Backrest Choose backrest pad size Pad & backrest Be aware the 1 1/4" doesn't have much padding. Also we recommend not using the 14 x 10" if you carry a passenger very often as it does not allow enough room for the passenger's legs. Please choose standard or "Z" version bracket (If not indicated, we will ship the standard.) Before anyone asks, no you can't buy it on the order form for $0.01; its just to make the order form give us the correct option | $ 195 $ 195 $210 | 10"w x 7"h Pad
7"w x 11"h Pad 14"w x 10"h Pad | $20.00 | ||||||||
| FJR 1300 Passenger Backrest Kit 2005 and earlier | Kit Choose backrest pad size Includes backrest support & luggage rack If you want the optional larger 11" x 18" rack instead of the stock half moon shape, click the button below. It is an additional $25.00 (This kit is for 2005 & earlier models.) | $ 250 $265 | 7"w x 11"h Pad14"w x 10"h Pad | $20.00 | ||||||||
| FJR 1300 Highway Pegs | Highway Pegs; pair (thru 2005) Highway Pegs; pair (2006 and up) | $ 120 $ 120 | through 2005 2006+ | $14.50 | ||||||||
| FJR 1300 Dash Shelf 2005 and earlier | Dash Shelf | $ 75 | $9.00 | |||||||||
| FJR 1300 Tip Over Protectors | Tip Over Protectors |
|
| |||||||||
| FJR 1300 1" Risers 2005 and earlier | 1" Risers These will give you 1" higher (measured in a direct line with the angle of your forks) handlebars. | $ 100.00 | through 2005 | $8.50 | ||||||||
| FJR 1300 2" Risers 2005 and earlier | 2" Risers These will give you 2" higher (measured in a direct line with the angle of your forks) and setback handlebars. These are for 2005 and older. On a 2005 you will need longer hoses to get 2". These will not fit a 2006. | $ 132.50 | through 2005 | $9.00 | ||||||||
| FJR 1300 1 3/8" Risers 2006 + | 1 3/8" Risers These will give you 1 3/8" higher (measured in a direct line with the angle of your forks) handlebars. | $ 110.00 | 2006+ | $8.50 | ||||||||
| ST 1100 Accessories | ||||||||||||
| Is your address outside the United States? Click here before ordering to avoid unnecessary delays. | ||||||||||||
| ST 1100 Dash Shelf | Partial (square cut) (Our drink holder will NOT work with this) | $65 | $8.00 | |||||||||
| Partial (square cut) with built in drink holder | $85 | $8.00 | ||||||||||
| ST1100 Handlebar Risers ABS models need a longer brake line | ||||||||||||
| ST1100 Handlebar Risers; 2" | $109 | $12 | ||||||||||
| ST1100 Handlebar Risers; 3" furnished with heavier handlebar clamps | $109 | $12 | ||||||||||
| ST1100 Highway Pegs | ST1100 Highway Pegs; pair | $ 137.50 | $12 | |||||||||
| Luggage Racks | ||||||||||||
| Luggage Racks | ||||||||||||
| Concours Luggage Rack; 12 x 16, black powder coat (will work w/ Concours backrest) | $ 125 | $19 | ||||||||||
| ST1100 Luggage Rack; 9x12, black powder coat | $ 95 | $12 | ||||||||||
| ST1100 Luggage Rack; 11x22, black powder coat | $120 | $15 | ||||||||||
| ST1100 Luggage Rack; 14x22, black powder coat | $135 | $19 | ||||||||||
| Is your address outside the United States? Click here before ordering to avoid unnecessary delays. | ||||||||||||
| Back Rests & Pads | ||||||||||||
| Back Rests & Pads | ||||||||||||
| Concours Backrest mounting bracket (No pad included. You will need one of the backrest pads below, the stock pad will NOT fit) Please read this BEFORE you order | $60 | $6.50 | ||||||||||
| ST1100 Backrest mount; includes reinforcing plate (if needed) No pad included. You will need one of the backrest pads below, the stock pad will NOT fit. Indicate if this will be mounted on a stock rack or ours. You must use either a Honda luggage rack or one of ours, or there is no attachment point for the backrest support. | $85 | $15 | ||||||||||
| Backrest pad 10"w x 7"h (Will fit any Sampson backrest mount) Be aware the 1 1/4" doesn't have much padding. | $72.50 | $9 | ||||||||||
| Backrest pad 7"w X 11"h (Will fit any Sampson backrest mount) | $65 | $9 | ||||||||||
| Backrest pad 14"w x10"h (Will fit any Sampson backrest mount) | $82.50 | $10 | ||||||||||
| Miscellaneous ST1100 | ||||||||||||
| Misc ST1100 | ST1100 Radar Detector Mount (gloss black) | $30 | $6.00 | |||||||||
| ST1100 Drink Holder | $25 | $6.00 | ||||||||||
| Helmet lock brackets; (locks NOT included). These accept 7/8" handlebar locks. Your local dealer may have the locks or can order them for you.
| $20 | $6.50 | ||||||||||
| General Accessories Not made by Sampson but these are quality products | ||||||||||||
| Is your address outside the United States? Click here before ordering to avoid unnecessary delays. | LED Voltmeter | $49.00 | $5.50 | |||||||||
| Throttle Rockers (includes US shipping) | $11.95 | $0 | ||||||||||
| 2 Throttle Rockers (includes US shipping) | $22.00 | $0 | ||||||||||
| Helmet Glare Reducer Shipped Parcel Post unless with other items | $8.50 | $1 | ||||||||||
| Bungie Buddys Shipped Parcel Post unless with other items | ||||||||||||
| Pack of 2 Bungie Buddys | $5.95 | $2 | ||||||||||
| Pack of 4 Bungie Buddys | $9.95 | $3 | ||||||||||
| Pack of 6 Bungie Buddys | $13.95 | $3.50 | ||||||||||
| Fitting Kits & Related | The fittings kits below are included with the Concours and ST1100 cells | |||||||||||
| Concours Fitting Kit (includes includes fuel pump, lines, fittings, and a switch) | $125 | $12 | ||||||||||
| ST1100 "Vision" Fuel Cell SAE Fittings Kit includes mega fuel line | $80 | $10 | ||||||||||
| ST1100 Fuel Cell SAE Fittings Kit includes fuel line (these lines & fittings will NOT fit the Vision 2001) | $50 | $10 | ||||||||||
| Tank Fitting Kit This provides a way to tie a fuel line from a cell into a stock metal tank. This requires drilling a hole in your stock tank. | $20 | $6.00 | ||||||||||
|
$28.50 $48.50 | $6.00 | ||||||||||
| $13.50 $20.00 | $6.00 | ||||||||||
| Replacement Standard "Flip Style" Filler Cap & Mount | $30 | $6.00 | ||||||||||
| Replacement Cap; New style with screw in cap | $45 | $6.00 | ||||||||||
| 12 Volt Solenoid Gas Valves | $50 $54 | $6.50 | ||||||||||
| License Plate Bracket For Fuel Cell w/ tail/stop light | $37.50 | $6.50 | ||||||||||
| Insurance | Insurance for Shipping 
| Varies | $0.00 | |||||||||
| Foreign Postage | ||||||||||||
| Foreign Postage | Additional Postage | $ ? | ||||||||||
| ||||
| We Accept | ||||
| Money Orders | Personal Checks (Allow time to clear) | Pay Pal | ||
| Sampson Sport Touring PO Box 272 Chloride, AZ 86431 |
| Fuel Cells | Handlebar Risers | Highway Pegs | Luggage Racks | Back Rests | Hyper-Lites | Voltmeter | FAQ | Miscellaneous | Links | Motorcycles For Sale | Sampson Made Order Form | HyperLites Order Form | | Home © 2000 - 2008 Sampson Sport Touring |
